Product name
Vibration transducer
Vibration real wave velocity transmitter

Model

310W-6.25

Series

310W

Feature / Application

•Velocity real wave output

•IEPE voltage signal

•High sensitivity

•Hermetic seal

•Case isolated

•EMI / RFI shielded

•Shock resistance

•Blowing machine

•Gear box monitoring

•Bearing detection

•Machine monitoring

Product Introduction

Model 310W is an industrial piezo-electrical accelerometer permitting vibration velocity real wave measurements. 310W features an annular shear ceramic crystal which exhibits excellent output stability over time. The accelerometer incorporates an internal circuit with in a two-wire IEPE system which transmits its low impedance voltage output through the same cable that supplies the constant current power. Signal ground is internal shielded and isolated from the outer case of the unit. Polarity inversion protection for the amplify circuit is inherent in the circuit design. The welded stainless-steel construction provides a hermetic housing. The standard MIL-C-5015 glass insulated connector provides long-term stability over the operating temperature range. In addition to adhesive mounting, 310W has ¼-28 threaded holes for stud mounting on the test object. The 310W provides wide frequency response and shock resistance, which is ideal for industrial vibration monitoring under incidental shock environment. Senther’s model 16-L is a MIL-C-5015 connector mating cable for the sensor.

Product specification
Range(g) 0
Velocity Range(in/s) 6.25
Sensitivity( ±10%) 800
Frequency Range(Hz) 4 - 5000
Weight(g) 87
Shock Limit 2000
Operation Temp(°C) -40 to 120
Output Type IEPE
Axial Single axial
Mounting Stud
Temp.Signal N/A
Sensor Type Vibration Transducer
Sens. Unit mV/(in/s)
Excitation Constant current: 2~10mA
Mating cable 16A