Product name
Vibration transducer
RMS peak output accelerometer

Model

310CP-20

Series

310CP

Feature / Application

•RMS peak output

•4-20mA current signal

•Hermetic seal

•Case isolated

•EMI / RFI shielded

•Shock resistance

•Blowing machine

•Gear box monitoring

•Bearing detection

•Machine monitoring

Product Introduction

Model 310CP is an industrial piezo-electrical accelerometer permitting vibration measurements. 310CP features an annular shear ceramic crystal which exhibits excellent output stability over time. The accelerometer incorporates an internal circuit with in a two-wire system which transmits the 4~20mA current output through the same cable that supplies the voltage excitation. Signal ground is internal shielded and isolated from the outer case of the unit. Polarity inversion protection for the amplify circuit is inherent in the circuit design. The welded stainless-steel construction provides a hermetic housing. The standard MIL-C-5015 glass insulated connector provides long-term stability over the operating temperature range. In addition to adhesive mounting, 310CP has ¼-28 threaded holes for stud mounting on the test object. 310CP provides wide frequency response and shock resistance, which is ideal for industrial vibration monitoring under incidental shock environment. Senther’s model 16-L is a MIL-C-5015 connector mating cable for the sensor.

Product specification
Range(g) 20
Velocity Range(in/s) 0
Sensitivity( ±10%) 0.8
Frequency Range(Hz) 3 - 13000
Weight(g) 80
Shock Limit 5000
Operation Temp(°C) -55 to 85
Output Type Current
Axial Single axial
Mounting Stud
Temp.Signal N/A
Sensor Type Vibration Transducer
Sens. Unit mA/g
Excitation 12 - 30 VDC
Mating cable 16A