Product name
VC accelerometer
Tri-axial CAN output accelerometer

Model

835CA-8

Series

835CA

Feature / Application

•CAN protocol

•High Resolution

•Rugged design

•Hermetic seal

•Case isolated

•Plug and play application

•EMI / RFI shielded

Product Introduction

Model 835CA is a customizable CAN protocol triaxial accelerometer which simultaneously measures acceleration and low-frequency vibration in three mutually perpendicular axial. The sensing element is triaxial capacitive accelerometer family utilizes a silicon Micro-Electro-Mechanical System (MEMS) variable capacitance sensing element. The output signal is scaled proportionally to the applied acceleration, signal format can be CAN protocol defined by end user. The accelerometer is powered by a single regulated supply between 9 to 36 Vdc. Thermal drift has been compensated by internal circuit for the best environment stability. The sensing element and electronics are contained in a water proof housing with a M12 5-pins connector. Signal ground is isolated from the test object that benefit from the anodized aluminum housing. The accelerometer can be mounted by M4 metric screw or adhesive. 835CA is well-suited for a wide variety of OEM applications requiring low frequency measurements and reliability package. Model 18T-L is the mating cable for the sensor, refer below measurement configuration for wiring.

Product specification
Range(g) 8
Velocity Range(in/s) 0
Sensitivity( ±10%) 0
Frequency Range(Hz) 0 - 400
Weight(g) 130
Shock Limit 1000
Operation Temp(°C) -40 to 85
Output Type CAN protocol
Axial Tri-axial
Mounting Adhesive/Screw
Temp.Signal N/A
Sensor Type VC Accelerometer
Sens. Unit Digital
Excitation 9 - 36 VDC
Mating cable 19A