Product name
IEPE sensor
Miniature tri-axial IEPE accelerometer

Model

730A-2000

Series

730A

Feature / Application

• Tri-axial measurement

• Flexible cable exit

• Adhesive or screw mounting

• Hermetic sealed

• Annular shear mode

• Wide frequency response

• Mounting ground isolated

Product Introduction

Model 730A is an IEPE triaxial accelerometer designed for miniature applications. The accelerometer uses shear piezo electronical element which provides a wide operating frequency range. The IEPE sensor combines outstanding crystals and low noise integral microelectronics to achieve very low sensitivity variation over the operating temperature range, compared to other sensing element designs. The shear element technology also ensures high immunity to base strain errors. The accelerometer uses a welded titanium construction for low mass and a light weight 4 pin connector, or integral cable assembly for lower mass and wider frequency operation. Excellent frequency response, both amplitude and phase, provide the user with a triaxial accelerometer ideally suited for structural and component testing, drop tests and general laboratory vibration work. The miniature cube size of this accelerometer enables the test engineer or technician to measure the accelerations of three orthogonal axes of vibration simultaneously on lightweight structures. All variations provide reliable measurements and long-term stability.

Product specification
Range(g) 2000
Velocity Range(in/s) 0
Sensitivity( ±10%) 2.5
Frequency Range(Hz) 0.5 - 15000
Weight(g) 4.3
Shock Limit 5000
Operation Temp(°C) -55 to 125
Output Type IEPE
Axial Tri-axial
Mounting Adhesive/Stud
Temp.Signal N/A
Sensor Type IEPE
Sens. Unit mV/g
Excitation Constant current: 2~10mA
Mating cable 13