Product name
IEPE sensor
Tri-axial low frequency IEPE accelerometer

Model

560A-10

Series

560A

Feature / Application

•Low frequency response                         •Aircraft testing

•Flexible cable exit                                     •Shock testing

•Adhesive or screw mounting                  •Road testing

•Hermetic sealed                                       •Modal analysis

•Annular shear mode

•Tri-axial measurement

•Mounting ground isolated

Product Introduction

Model 560A is an IEPE triaxial accelerometer designed for small size applications. The accelerometer uses shear piezo electronical element which provides a wide operating frequency range. The IEPE sensor combines outstanding crystals and low noise integral microelectronics to achieve very low sensitivity variation over the operating temperature range, compared to other sensing element designs. The shear element technology also ensures high immunity to base strain errors. The accelerometer uses a welded titanium construction for low mass and a light weight 4 pin connector, or integral cable assembly for lower mass and wider frequency operation. Excellent frequency response, both amplitude and phase, provide the user with a triaxial accelerometer ideally suited for structural and component testing, drop tests and general laboratory vibration work. The small cube size of this accelerometer enables the test engineer or technician to measure the accelerations of three orthogonal axes of vibration simultaneously on lightweight structures. All variations provide reliable measurements and long-term stability.

Product specification
Range(g) 10
Velocity Range(in/s) 0
Sensitivity( ±10%) 500
Frequency Range(Hz) 0.3 - 4000
Weight(g) 12.6
Shock Limit 5000
Operation Temp(°C) -55 to 125
Output Type IEPE
Axial Tri-axial
Mounting Adhesive/Stud
Temp.Signal N/A
Sensor Type IEPE
Sens. Unit mV/g
Excitation Constant current: 2~10mA
Mating cable 13