Product name
IEPE sensor
Miniature IEPE accelerometer

Model

710A-50

Series

710A

Feature / Application

• Miniature Size

• Adhesive mounting

• Hermetic seal

• Annular shear mode

• Wide frequency response

• Shock duration

Product Introduction

Model 710A is a miniature IEPE single axial accelerometer permitting simultaneous shock and vibration measurements. 710A features an annular shear ceramic crystal which exhibits excellent output stability over time. The accelerometer incorporates an internal circuit in a two-wire IEPE system which transmits its low impedance voltage output through the same cable that supplies the constant current power. Signal ground is connected to the outer case of the unit. Isolated mounting adapter is available. Polarity inversion protection for the amplify circuit is inherent in the circuit design. The welded titanium construction provides a lightweight hermetic housing. The miniature M3 glass insulated connector provides long-term stability over the operating temperature range. The 710A provides wide frequency response, which is ideal for dynamic vibration and shock measurement especially for lightweight structures and drop testing for the packaging industry. Senther’s model 12-3 is a M3 to BNC breakout cable for the sensor.

Product specification
Range(g) 50
Velocity Range(in/s) 0
Sensitivity( ±10%) 100
Frequency Range(Hz) 0.5 - 15000
Weight(g) 0.9
Shock Limit 5000
Operation Temp(°C) -55 to 125
Output Type IEPE
Axial Single axial
Mounting Adhesive
Temp.Signal N/A
Sensor Type IEPE
Sens. Unit mV/g
Excitation Constant current: 2~10mA
Mating cable 12