Product name
IEPE sensor
Tri-axial water-proof IEPE accelerometer

Model

533A-100

Series

533A

Feature / Application

• Tri-axial measurement

• Case Isolated

• Internally Shielded

• Through hole mounting

• Hermetic seal

• Annular shear mode

• Wide temperature range

• Wide frequency response

Product Introduction

Model 533A is an IEPE triaxial accelerometer designed for industrial applications. The accelerometer uses shear piezo electronical element which provides a wide operating frequency range. The IEPE sensor combines outstanding crystals and low noise integral microelectronics to achieve very low sensitivity variation over the operating temperature range, compared to other sensing element designs. The shear element technology also ensures high immunity to base strain errors. The accelerometer uses a welded stainless steel construction and a light weight connector or integral cable assembly for lower mass and wider frequency operation. Model 533A can be mounted by screw through the center hole benefit of flexible cable exit. Excellent frequency response, both amplitude and phase, provide the user with a triaxial accelerometer ideally suited for structural and component testing, drop tests and general laboratory vibration work. The miniature size of this accelerometer enables the test engineer or technician to measure the accelerations of three orthogonal axes of vibration simultaneously on lightweight structures. All variations provide reliable measurements and long-term stability.

Product specification
Range(g) 100
Velocity Range(in/s) 0
Sensitivity( ±10%) 50
Frequency Range(Hz) 0.5- 6000
Weight(g) 30
Shock Limit 5000
Operation Temp(°C) -55 to 125
Output Type IEPE
Axial Tri-axial
Mounting Adhesive/Screw
Temp.Signal N/A
Sensor Type IEPE
Sens. Unit mV/g
Excitation Constant current: 2~10mA
Mating cable N/A