Product name
IEPE sensor
Tri-axial IEPE accelerometer

Model

530A-100

Series

530A

Feature / Application

• Tri-axial measurement

• 4 pins connector output

• Adhesive or stud mounting

• Hermetic sealed

• Annular shear mode

• Wide frequency response

Product Introduction

Model 530A is an IEPE triaxial accelerometer designed for industrial applications. The accelerometer uses shear piezo electronical element which provides a wide operating frequency range. The IEPE sensor combines outstanding crystals and low noise integral microelectronics to achieve very low sensitivity variation over the operating temperature range, compared to other sensing element designs. The shear element technology also ensures high immunity to base strain errors. The accelerometer uses a welded titanium construction and a light weight 4 pins connector, or integral cable assembly for lower mass and wider frequency operation. Excellent frequency response, both amplitude and phase, provide the user with a triaxial accelerometer ideally suited for structural and component testing, drop tests and general laboratory vibration work. The miniature cube size of this accelerometer enables the test engineer or technician to measure the accelerations of three orthogonal axes of vibration simultaneously on lightweight structures. All variations provide reliable measurements and long-term stability.

Product specification
Range(g) 100
Velocity Range(in/s) 0
Sensitivity( ±10%) 50
Frequency Range(Hz) 0.4 - 11000
Weight(g) 28
Shock Limit 5000
Operation Temp(°C) -55 to 125
Output Type IEPE
Axial Tri-axial
Mounting Adhesive/Stud
Temp.Signal N/A
Sensor Type IEPE
Sens. Unit mV/g
Excitation Constant current: 2~10mA
Mating cable 13