Model
513A-500
Series
513A
Feature / Application
• Miniature Size
• Adhesive mounting
• Hermetic seal
• Base isolation
• Annular shear mode
• Wide temperature range
• Wide frequency response
Model 513A is an IEPE single axial accelerometer permitting simultaneous shock and vibration measurements. 513A features an annular shear ceramic crystal which exhibits excellent output stability over time. The accelerometer incorporates an internal circuit with TEDS(optional) in a two-wire IEPE system which transmits its low impedance voltage output through the same cable that supplies the constant current power. Signal ground is connected to the outer case of the unit. Polarity inversion protection for the amplify circuit is inherent in the circuit design. The welded stainless-steel construction provides a lightweight hermetic housing. The miniature 10-32 glass insulated connector provides long-term stability over the operating temperature range. 513A is available of adhesive mounting on the test object, isolated spacer is provided with the sensor for the best practices. 513A provides wide frequency response, which is ideal for dynamic vibration and shock measurement especially for lightweight structures and drop testing for the packaging industry. Senther’s model 11-3 is a 10-32 to BNC breakout cable for the sensor.
Range(g) | 500 |
Velocity Range(in/s) | 0 |
Sensitivity( ±10%) | 10 |
Frequency Range(Hz) | 0.5 - 15000 |
Weight(g) | 3.8 |
Shock Limit | 5000 |
Operation Temp(°C) | -50 to 125 |
Output Type | IEPE |
Axial | Single axial |
Mounting | Adhesive |
Temp.Signal | N/A |
Sensor Type | IEPE |
Sens. Unit | mV/g |
Excitation | Constant current: 2~10mA |
Mating cable | 11 |